Canon imageRUNNER ADVANCE 8105, Getting Started

Page: 129 / 256

Protocol Settings
5-3
5
Using a NetWare Network (Windows)
Protocol Settings
This section describes how to specify the protocol settings for the machine using the control panel. If you are configuring the
settings for the first time, use the control panel of the machine.
After configuring the settings, you can change them using software other than the control panel of the machine. For details, see
e-Manual > Settings/Registration.
1
On the Network screen, press [NetWare Settings] → specify the following .
<Use NetWare>: [On]
Select the frame type for your environment from the Frame Type drop-down list. If you select [Auto Detect], the frame type is automatically
determined.
Select the print service specified in "NetWare Print Service Settings" (e-Manual > Network) from the Print Service drop-down list.
The following print services are available:
[Bindery PServer]:
Used in the queue server mode (Bindery mode print service).
[RPrinter]:
Used in the remote printer mode (Bindery mode print service).
[NDS PServer]:
Used in the queue server mode (NDS print service).
[NPrinter]:
Used in the remote printer mode (NDS print service).
If [NetWare Settings] is not displayed, consult your local authorized Canon dealer.
If you set <Use NetWare> to 'On', the machine will not enter a complete Sleep mode.
•
•
•
•
•
•