Canon imageRUNNER ADVANCE 8085, Maintenance Manual

Page: 33 / 176

Paper Deck Unit-C1/POD Deck Lite-A1 (Optional) 1-21
1
Routine Maintenance
8
Fix the outer size change plate with the two blue screws using a coin or something similar, while
slightly holding its center front portion and pressing it towards you.
Fix the screws by turning them in the clockwise direction.
Fasten the left blue screw before fastening the right blue screw.
If you fasten the blue screws without pressing the outer size change plate towards you, the plate may be fixed at an angle. If you use the
paper deck with a tilted outer size change plate, paper may be fed as slanted, poor print quality may result, and paper jams may occur.
Therefore, make sure to fasten the blue screw while pressing the outer size change plate towards you.
9
Align the rear edge retainer with the marks for the desired paper size.
A4
L T R
B5
If the rear edge retainer is not aligned properly, paper may become jammed, the quality of the image may be degraded, or the inside of
the machine may become dirty. Make sure to load paper with the rear edge retainer properly aligned with the paper size marks on the
top and base of the paper deck.