Canon imageRUNNER 6020 Series, Reference Manual Reference Manual

Page: 469 / 524

Card Reader-C1
7-47
Optional Equipment
7
Card Reader-C1
When the Card Reader-C1 (optional) is attached to the main unit, you must insert
the control card before operating this machine. The Card Reader-C1 controls
Department ID Management automatically.
IMPORTANT
•
If you use a login service other than Default Authentication, Limit Functions setting is not
available.
•
If SSO is set as a login service, you cannot use the Card Reader-C1 (optional).
•
If SDL is set as a login service, enter your card number in the card ID field. See the
MEAP SMS Administrator Guide for details.
NOTE
•
If the Basic Features screen does not appear on the touch panel display even when the
control card is inserted, make sure that:
- The control card is inserted in the correct direction.
- The control card is inserted as far as it can go.
- An unusable control card is not inserted.
•
Insert the usable control card correctly.
•
For instructions on how to turn the power ON, see “Main Power and Control Panel
Power,” on p. 1-32.
•
When the Card Reader-C1 (optional) is attached, the following two types of cards can be
used:
- The optical card can manage up to 200 departments.
- The magnetic card can manage up to 3,000 departments.
•
The maximum number of departments that can be managed, depends on the machine.
The imageRUNNER 6020i/5020i and imageRUNNER 6020/5020 can manage up to
1,000 departments.
CONTROL CARD
1 2 3
CONTROL CARD III
001
1 2 3
Magnetic Card Optical Card