manualshive.com logo in svg

Canon imageRUNNER 6020 Series, Reference Manual Reference Manual

Share
Download
Canon imageRUNNER 6020 Series Reference Manual Reference Manual Download Page 314

Auto Online/Offline (Auto Online/Offline)

4-90

4

System Manager Settings

Auto Online/Offline 

(Auto Online/Offline)

It is necessary to connect this machine to a network to use the remote scanning 
functions. This section explains how to switch between online and offline.

NOTE

[Auto Online/Offline] is only displayed if the Network Scan function is enabled.

Setting Auto Online (Auto Online)

If Auto Online is set to ‘On’, you can set this machine to automatically connect to a 
network simply by pressing [Scan] on the Basic Features screen.

NOTE

The default setting is ‘Off’.

1

Press

(Additional Functions) 

➞

 [System Settings].

If the System Manager ID and Password have already been set, enter the System 
Manager ID and System Password using

-

(numeric keys) 

➞

 press

(ID).

2

Press [Auto Online/Offline] 

➞

 [Auto Online].

NOTE

If the desired setting is not displayed, press [

▼

] or [

▲

] to scroll to the desired 

setting.

0

9

ID

Summary of Contents for imageRUNNER 6020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands