manualshive.com logo in svg

Canon imageRUNNER 6020 Series, Reference Manual Reference Manual

Share
Download
Canon imageRUNNER 6020 Series Reference Manual Reference Manual Download Page 64

Main Power and Control Panel Power

1-32

Bef

ore 

Y

ou Star

t Using 

This Machine

1

Main Power and Control Panel Power

The machine is provided with two power switches, a main power switch, a control 
panel power switch, and a breaker that detects excess current or leakage current.

How to Turn ON the Main Power

This section explains how to turn ON the main power.

1

Make sure that the power plug is firmly inserted into the 
power outlet.

WARNING

Do not connect or disconnect the power cord with wet hands as this may 
result in electrical shock.

2

Press the power switch to ON (“I” side). The main power 
switch is located on the right side of the machine.

The main power indicator on the control panel lights when the main power switch 
is turned ON.

IMPORTANT

If the main power indicator on the control panel does not light even though the main 
power switch is ON, be sure to check the breaker to see if it is OFF. (See “When the 
Power Does Not Turn ON,” on p. 6-52.)

NOTE

When turning OFF the main power, press the main power switch to the “

” side.

Summary of Contents for imageRUNNER 6020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands