Canon imageRUNNER 5070, Reference Manual

Page: 329 / 600

Department ID Management 7-21
7
Sy
st
em
M
ana
ger
Set
ti
ngs
❑
Press [Password]
➞
enter the desired password using - (numeric keys).
❑
Press [Confirm]
➞
enter the same number to confirm the password using
- (numeric keys)
➞
press [OK].
You cannot store a password with only zeros as the number, such as
<0000000>. If you enter a number that begins with zeros, the leading zeros
are ignored.
Example: If <02> or <002> is entered, <0000002> is stored.
NOTE
•
If you make a mistake when entering the password, press (Clear) to clear the
password
➞
enter the correct password.
•
You cannot change the Department ID.
•
If Use Asterisks to Enter Access No./Passwords in System Settings (from the
Additional Functions screen) is set to 'Off', the password is not displayed as
asterisks (********). (See "Setting the Display Method When Entering a Password,"
on p. 7-113.)
5
If you want to change or set a page limit restriction, press
[Turn Limits On/Off and Set Page Limits].