Canon imageRUNNER 5070, Reference Manual

Page: 314 / 600

Specifying the System Manager Settings 7-6
7
Sy
st
em
M
ana
ger
Set
ti
ngs
❑
Press [Password]
➞
enter the desired password using - (numeric keys).
❑
Press [Confirm]
➞
enter the same number to confirm the password using
- (numeric keys)
➞
press [OK].
You cannot store a System Password with only zeros as the number, such as
<0000000>. If you enter a number that begins with zeros, the leading zeros
are ignored.
Example: If <02> or <002> is entered, <0000002> is stored.
NOTE
•
If you make a mistake when entering the password, press (Clear) to clear the
password
➞
enter the correct password.
•
If Use Asterisks to Enter Access No./Passwords in System Settings (from the
Additional Functions screen) is set to 'Off', the System Password is not displayed
as asterisks (********). (See "Setting the Display Method When Entering a
Password," on p. 7-113.)
5
Press [System Manager]
➞
enter the System Manager's name
➞
press [OK].