manualshive.com logo in svg

Canon imageRUNNER 2318, Reference Manual, Page: 211 / 292

Share
Download
Canon imageRUNNER 2318 Reference Manual Download Page 211

Replacing the Staple Cartridge

6-23

Ro

ut

ine Ma

int

e

n

ance

6

Ro

ut

ine Ma

int

e

n

ance

5

Remove the seal holding the 
staples together, by pulling it 
straight out, and then down.

IMPORTANT

Make sure that you pull the seal straight 
out, and then down. If you pull it out at an 
angle, it may tear.

6

Gently push the staple case into 
the finisher, until it is securely in 
place.

7

Close the front cover of the 
finisher.

CAUTION

When closing the front cover of the 
finisher, be careful not to get your 
fingers caught, as this may result in 
personal injury.

NOTE

If there are no staples ready for stapling 
after the cover is closed, the stapler unit 
automatically performs a “dry” stapling 
operation to reposition the staples.

Summary of Contents for imageRUNNER 2318





































































































































































































































































































Reviews:

No comments