Canon imageRUNNER 2270, Service Manual

Page: 645 / 994

Chapter 15
15-39
An address table is being imported from or to the
remote UI; or, a different transmission component is
being used.
Start over once again.
# 711
All memory of the Box is used. Delete files from the Box.
# 712
The Box is full of files. Remove file from the Box.
# 713
The file has been removed from the Box before
transmitting the URL.
Put the file in question back into the Box, and start
over.
# 751
The server is yet to start up. The network is
disconnected. (The connection to the target may have
failed, or the connection may have been cut in the
middle.)
Check the target. Check the network.
# 752
The SMTP server name of the e-main/i-fax in question
may be wrong, or the server in question is yet to start
up. Or, the appropriate domain name or e-mail address
has not been set. Or, the network has been
disconnected.
Using the network settings of the system control setup
(user mode), check the SMTP server name, domain
name, and e-mail address. Check to see that the SMTP
server is operating normally. Check the connection of
the network.
# 753
A TCP/IP error has occurred in the course of e-mail
transmission. (e.g., socket, select error)
Check the condition of the network cable and the
connector. If the operation does not return to normal,
try turning off and then back on the main power of the
machine.
# 754
The server has not been started up for transmission, or
the network is disconnected. Or, the target settings are
wrong.
Check the server and the network. Check the settings of
the target.
# 755
The TCP/IP settings are not operating normally, thus
not permitting transmission.
In user mode, check the TCP/IP settings.
Cause Remedy