Canon imageRUNNER 2270, Service Manual

Page: 537 / 994

Chapter 13
13-6
F-13-16
B-2. 2nd Side of Large-Size Paper (left/
right image margin)
1) Enter the same ADJ-REFE:
C O P I E R > A D J U S T > F E E D -
ADJ>ADJ-RE-L
2)
Make a double-sided copy using
large-size paper, and check to make sure
that the marking is as indicated.
3)
If not as indicated, change the
adjustment value for the 2nd side right/left
image margin for large-size paper:
C O P I E R > A D J U S T > F E E D -
ADJ>ADJ-RE-L
An increase of '1' will decrease the
left/right image margin on the front side by
0.1 mm.
F-13-17
4) Record the new setting on the service
label:
- ADJ-REFE
- ADJ-RE-L
5) Press the Reset key twice to end
service mode.
13.1.4 Manual Feed
Tray
0007-4910
A. Adjusting the Left/Right Image
Margin (1st side; mechanical)
1) Put paper in the manual feed tray.
2) Make a copy using the manual feeder as
the source of paper, and check to be sure
that the left/right image margin is 2.5 +/-
1.5 mm.
Paper left edge
Increase the ADJ-EFE setting.
(an increase of '1' will
increase the margin by
0.1 mm)
Decrease the
ADJ-REFEsetting.
(a decrease of
'1' willdecrease
the margin by 0.1 mm)
10
8
6
5
4
2
0
2nd side of small-size
double-sided copy
: 2.5 2.0mm
Paper left edge
Increase the
ADJ-REF-L setting.
(an increase of '1'
will decrease the
margin by 0.1 mm)
Decrease the
ADJ-REF-L setting.
(a decrease of '1'
will increase the
margin by 0.1 mm)
10
8
6
5
4
2
0
2nd side of large-size
double-sided copy
: 2.5 2.0mm