Canon imageRUNNER 2200 Series Page 60 Copying Manual Download

Page: 60 / 174

Collating Copies (Finisher)

1-52

Basic Cop

ying

●

When you select “Rotate”

When the Automatic Paper Selection mode is set, press “Next”

select LTR,

LTRR, STMT, or STMTR-size paper

press “OK.”

Press “OK,” as long as:

- Available paper size is selected manually.

- Available paper size is loaded in both horizontal and vertical direction.

- Drawer Eligibility for APS/ADS of the paper drawers loaded with the available paper size

is set to “On.”

Press

(Start).

When the original is placed on the platen glass, follow the instructions that appear on the
screen and press

(Start) once for each original. When scanning is completed, press

“Done.”

Copying starts.

NOTE

•

To cancel the setting, press “Finisher”

“Cancel,” in this order.

•

To cancel all settings and return the machine to the Standard mode, press

(Reset).

Summary of Contents for imageRUNNER 2200 Series















































































































































































Search results

Summary of Contents for imageRUNNER 2200 Series

Reviews:

Related manuals for imageRUNNER 2200 Series

Brands by name

Popular brands

Canon imageRUNNER 2200 Series, Copying Manual

Search results

Summary of Contents for imageRUNNER 2200 Series

Reviews:

Related manuals for imageRUNNER 2200 Series

Brands by name

Popular brands