Canon imageRUNNER 2200 Series Page 97 Copying Manual Download

Page: 97 / 174

Making Copies for Use as a Booklet (Booklet)

2-13

Useful Cop

y Functions

NOTE

•

Set the cover paper face down in the stack bypass.

●

When you select “Add Cover”:

Select “Yes” or “No” to specify whether or not to copy on the cover, and press
“Next.”

Select the type of paper, and press “Next.”

IMPORTANT

•

The paper used for the cover page must be the same size as the other pages.

•

The paper used for the main text or the cover must be from 17-lb to 20-lb bond (64g/m

80g/m

•

When you select “Add Cover,” you cannot set the paper used for the main text in the stack
bypass.

NOTE

•

The cover page can only be copied on the front.

Summary of Contents for imageRUNNER 2200 Series















































































































































































Search results

Summary of Contents for imageRUNNER 2200 Series

Reviews:

Related manuals for imageRUNNER 2200 Series

Brands by name

Popular brands

Canon imageRUNNER 2200 Series, Copying Manual

Search results

Summary of Contents for imageRUNNER 2200 Series

Reviews:

Related manuals for imageRUNNER 2200 Series

Brands by name

Popular brands