manualshive.com logo in svg

Canon imageRUNNER 2200 Series, Copying Manual

Share
Download
Canon imageRUNNER 2200 Series Copying Manual Download Page 7

How to Use This Manual

vi

How to Use This Manual

Symbols Used in This Manual

The following symbols are used in this manual, for explanations of procedures and 
restrictions, handling cautions, and instructions that should be observed for safety.

Keys Used in This Manual

The following symbols and key names are used in this manual.

• Control panel keys………………

(Start)

• Touch panel display keys………“OK”

WARNING

Indicates a warning concerning operations that may lead to death or injury 
to persons if not performed correctly. In order to use the machine safely, 
always pay attention to these warnings.

 CAUTION

Indicates a caution concerning operations that may lead to injury to 
persons or damage to property if not performed correctly. In order to use 
the machine safely, always pay attention to these cautions.

 IMPORTANT

Indicates operational warnings and restrictions. Be certain to read these 
items to operate the machine correctly, and to avoid damage to the 
machine.

 NOTE

Indicates notes for operation or additional explanations. Reading these is 
highly recommended.

Summary of Contents for imageRUNNER 2200 Series















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands