Canon IMAGERUNNER 2020 Copying Manual Download Page 65

Page: 65 / 115

Frame Erase

2-11

Special Cop

ing F

atures

Use

(numeric keys) to enter the desired copy quantity

(1 to 99).

NOTE

•

For more information about entering the copy quantity, see “Specifying the
Required Number of Copies,” on p. 1-23.

•

The paper size is displayed according to the size of the original you have selected
in step 3.

Press [Start].

Copying starts.

NOTE

•

To cancel all settings and return the machine to the Standby display, press

(Reset).

•

To cancel copy jobs, see “Canceling a Copy Job,” on p. 1-18.

Binding Hole Erase

The Binding Hole Erase mode erases the shadows that appear on copies from
binding holes on originals.

Before using this mode, set the unit of measurement of the frame erase width in the
Additional Functions menu. (See “Frame Erase Width Unit of Measurement,” on
p. 3-24.)

IMPORTANT

•

Do not place originals with binding holes into the feeder, otherwise the originals may be
damaged.

•

The Binding Hole Erase mode cannot be used with the Two-Page Separation mode or
Different Size Originals mode.

ABC

DEF

JKL

GHI

MNO

TUV

PQRS

WXYZ

Tone

SYMBOLS

Start

Summary of Contents for IMAGERUNNER 2020




















































































































Search results

Summary of Contents for IMAGERUNNER 2020

Reviews:

Related manuals for IMAGERUNNER 2020

Brands by name

Popular brands

Canon IMAGERUNNER 2020, Copying Manual

Search results

Summary of Contents for IMAGERUNNER 2020

Reviews:

Related manuals for IMAGERUNNER 2020

Brands by name

Popular brands