Canon imageRUNNER 2016 Series Service Manual Download Page 27

 imageRUNNER 2016/2020 Series Service Guide

 

imageRUNNER 2016/2020 Series 

Approximately 40-1/8” x 49-1/4” (1018mm x 1249mm)  
(When left cover is open and paper drawer is pulled out.) 

Installation Space (WxD) 

imageRUNNER 2016 
Dimensions (HxWxD) 

Approximately 22-78” x 24-1/2” x 25” (580.4mm x 622mm x 633.4mm) 

imageRUNNER 2016i 
Dimensions (HxWxD) 

Approximately 26-1/2” x 24-1/2” x 26-3/8” (672mm x 622mm x 688mm) 

imageRUNNER 2020 
Dimensions (HxWxD) 

Approximately 26-1/4” x 24-1/2” x 25” (665.4mm x 622mm x 633.4mm) 

imageRUNNER 2020i 
Dimensions (HxWxD) 

Approximately 29-7/8” x 24-1/2” x 26-3/8” (757mm x 622mm x 688mm) 

imageRUNNER 2016: Approximately 87 lbs. (39.6 kg) 

imageRUNNER 2016i: Approximately 110 lbs. (49.7kg) 

imageRUNNER 2020: 101 lbs. (46 kg) 

Weight 

imageRUNNER 2020i: 123 lbs. (55.5 kg) 

2.  DADF-P1 (imageRUNNER 2016/2020 Option) 

DADF-P1 (imageRUNNER 2016/2020 Option, Standard on imageRUNNER 2016i/2020i models) 

Acceptable Original Size  

STMT, LTR, LTRR, LGL, 11”x17”   

Paper Capacity  

Up to 50 Sheets: STMT, LTR, LTRR  
Up to 25 Sheets: LGL, 11” x 17”  

Same Width /Different Width  

Different Size Original  

10 lb Bond to 32 lb Bond (one sheet) / 14lb Bond to 28lb Bond (multiple)  

DADF Paper Weights  

Approximately 20 sheets/minute B&W (LTR)  

Document Scanning Speed  

From first page (top of the original)  

Original Feeding Method  

4-7/8” x 22-1/4” x 19-1/4” (122mm x 565mm x 489.4mm)  

Dimensions (H x W x D)  

Approximately 16 lbs. (7.0 kg)  

Weight 

3.  Cassette Feeding Module-J1 (imageRUNNER 2016/2016i Option) 

Cassette Feeding Module-J1 (imageRUNNER 2016/2016i Option) 

Paper Capacity  

Cassettes / 1 x 250 sheets (20 lb. Bond)  

Paper Size  

STMT, LTR, LGL, LTRR, 11” x 17”  

Paper Weights  

17 lb. Bond to 24 lb Bond  

Power Source   

From Main Unit  

Dimensions (H x W x D)  

Approximately 4-5/8" x 22-7/8" x 22-3/8" (116mm x 580.3mm x 569.3mm)  

Weight  

Approximately 13 lbs. (6 kg)  

4.  Cassette Feeding Module-K1 (Option) 

Cassette Feeding Module-K1 (Option) 

Cassettes / 2 x 250 sheets (20 lb. Bond)  

Paper Capacity  

STMT, LTR, LGL, LTRR, 11” x 17”  

Paper Size  

17 lb. Bond to 24 lb Bond  

Paper Weights  

From Main Unit  

Power Source   

8" x 22-78" x 22-3/8" (201.8mm x 580.3mm x 569.3mm)  

Dimensions (H x W x D)  

Weight  

Approximately 26lbs. (12 kg)  

imageRUNNER 2016/2020 Series Service Guide  

Rev. 0 November2005 

 

Page 22

 

Summary of Contents for imageRUNNER 2016 Series

































Reviews: