Canon imageRUNNER 1750i, User Manual

Page: 111 / 618

Service Call Message 5-16
T
ro
u
b
lesho
ot
ing
5
Contacting Your Local Authorized Canon Dealer
If you have any problems or inquiries concerning the machine, contact your local
authorized Canon dealer with the following information:
•
Product name
•
Problem and status of the machine
•
The error code displayed on the screen, if any
If the machine does not operate normally even after it is restarted, turn OFF the
main power and disconnect the power cord from the wall outlet.
WARNING
Do not connect or di s connect the power cord with wet hand s , a s thi s may re s ult
in electrical s hock.
CAUTION
Alway s g ra s p the power plu g portion when di s connectin g the power cord.
Pullin g on the cord may expo s e or s nap the core wire or otherwi s e dama g e the
power cord. If the power cord i s dama g ed, thi s could cau s e current to leak,
re s ultin g in a fire or electrical s hock.
IMPORTANT
Even if a blackout occurs or the machine is turned OFF, a built-in battery retains the
documents received in memory for about an hour. However, if the battery is not fully
charged, the documents may not be retained. (To fully charge the built-in battery, it
takes about two hours after the main power switch is turned ON.)
The screen on the left appears when the
transmission of your request has failed. Try
again.
NOTE
If you cannot send repair requests
despite several attempts, turn OFF the
main power and disconnect the power
cord from the wall outlet. Contact your
local authorized Canon dealer with the
following information:
- Product name
- Problem and status of the machine
- The error code displayed on the
screen
Downloaded from ManualsPrinter.com Manuals