Starting the Remote UI
1-16
Using the Remote UI
1
Models Equipped with MEAP
For the models that are equipped with MEAP, follow the procedure below.
IMPORTANT
•
The following models are described in this section:
- iR6020i/5020i
- iR5020N
NOTE
For details of selection and setting of login service, consult your system administrator.
1
Start your web browser.
2
Enter the appropriate URL into [Address] or [Location].
http://<the IP address of the device>/
NOTE
If login service is not set, it is unnecessary to proceed step 3 and later. However, if
System Manager Settings is set, log on using the contents set for the settings, or
click [Cancel] without logging on.