Canon imagePROGRAF W2200S, Setup Manual

Page: 56 / 133

Setting the Printer Network Information
2
2-2
Software for Network Settings
When this printer is connected to a TCP/IP network, the IP address, subnet
mask, and other network information settings are required for the printer.
We recommend that you set the IP address with the GARO Device Setup
Utility first, and then use the Remote UI to set the subnet mask, default
gateway, and other network information settings.
These settings can also be done on the printer operation panel.
For more details about the IP address and other information assigned to the
printer, contact the network administrator. It is recommended that these
settings be done by the network administrator.
T
GARO Device Setup Utility
Windows software used on the computer to set the printer IP address and
network frame type. (
Æ
P.2-3)
Install on a computer that is connected to the printer through a LAN. This
cannot be used with a computer where the printer is connected locally.
T
Remote UI
Software that allows you to perform network information settings for the
printer, to display the current status of the printer, to cancel or temporarily
pause print jobs, or to display the print job history. This software utility is
built into the printer ROM. Use a Web browser from the computer to set the
printer IP address and to perform operation settings through the network.
(
Æ
Network Guide)
If the Remote UI is to be used, the IP address must be set on the printer.
T Printer Operation Panel
Refers to the menus that can be used on the printer operation panel. You can
use the buttons on the operation panel to perform the network information
settings and set up other printer functions. (
Æ
P.2-10)
T
ARP/PING Command
On the DOS command line, or from the console screen, execute the arp
command to perform the settings. First, check the MAC address with the
Ext. I/F print from the printer, then set the IP address and the MAC address.
(
Æ
Network Guide)