Canon imagePROGRAF iPF6400S Series, Basic Manual

Page: 137 / 164

iPF6400S Basic Guide
137
Er
ror M
essa
ge
Me
ssa
ges
r
egar
ding
pa
per
Cause Corrective Action
(When you have attempted to print
a test print sheet or other printer
status information.)
1. Press
▲
or
▼
to select
Change Paper
, and then press the
OK
button.
(See "Removing the Roll from the Printer.")
➔
P.17
(See "Removing Rolls From the Roll Holder.")
➔
User's Guide
2. Replace the roll with a roll 10 inches wide or larger.
(See "Loading Rolls on the Roll Holder.")
➔
P.12
(See "Loading Rolls in the Printer.")
➔
P.14
The printer will resume printing.
Press
▲
or
▼
to select Stop Printing , and then press the OK button.
PaprWidth Mismatch
Cause Corrective Action
When Detect Mismatch in the Control Panel menu is set to
Pause or Hold Job , the width of the loaded roll does not
match the width specified in Fit Roll Paper Width in the
printer driver.
Press
▲
or
▼
to select Print , and then press the OK
button to resume printing.
However, note that this error may cause paper jams and
affect the printing quality.
Press
▲
or
▼
to select Stop Printing , and then press the
OK button.
Follow these steps to replace the roll to match the width
specified in the printer driver.
1. Press
▲
or
▼
to select Change Paper , and then press
the OK button.
(See "Removing the Roll from the Printer.")
➔
P.17
(See "Removing Rolls From the Roll Holder.")
➔
User's
Guide
2. Replace with paper of the width configured in the printer
driver.
(See "Loading Rolls on the Roll Holder.")
➔
P.12
(See "Loading Rolls in the Printer.")
➔
P.14
The printer now starts printing the print job.
Make sure the roll width selected in the dialog box
displayed when you select
Fit Roll Paper Width in the
printer driver matches the width of the roll loaded in the
printer, and then try printing again.
Paper size not detected.
Cause Corrective Action
Paper has been loaded askew, or warped paper has been loaded. Press the OK button and reload the
paper.
(See "Loading Rolls in the Printer.")
➔
P.14
(See "Loading Sheets in the Feed Slot.")
➔
P.21
If
Not finished printing. Finish
printing remaining jobs?
is displayed
on the Display Screen, press the
OK
button.