iPF6400S Basic Guide
110
Tro
ubl
esho
otin
g
P
rob
lem
s Reg
ard
ing Pap
er
Cause
Corrective Action
without printing on it may leave a depression
on the leading edge.
TrimEdge Reload
to
On
or
Automatic
so that the paper edge is
automatically cut before printing.
(See "Menu Structure.")
➔
P.66
Margins are wide
Cause
Corrective Action
Rolls are advanced a specific amount before cutting to
prevent problems with cutting and paper ejection.
This operation is normal.
When
Cutting Mode
in the Control Panel menu was set to
Manual
, you selected
Do not perform
in response to the
Perform the detection of paper leading edge?
message.
Set
Cutting Mode
to
Manual
again, and select
Perform(recommend)
when the
Perform the detection of
paper leading edge?
message is displayed.
Note that when you select
Perform(recommend)
, if the
paper is strongly curled, the Printhead may rub against the
leading edge of the paper when the printing starts.
(See "Specifying the Cutting Method for Rolls.")
➔
User's
Guide
