CHAPTER 3 DISASSEMBLY & REASSEMBLY
IV. READING UNIT
1. Upper Reading Unit
Note:
The shapes of the reading guides for
the upper reading unit and the lower
reading unit are different.
1) Insert a tool into the left and right holes
{
1
(upper side), and lift up the reading
unit
{
2
a little bit using the tool while
detaching the inside fitting parts. Next,
remove the reading unit by lifting it
straight up.
Note:
A cable is connected to the rear side
of the reading unit, and should not be
pulled too much.
Figure 3-401
2) Remove the cable
{
1
from the cable
holder
{
2
, then remove the connector
{
3
and remove the reading unit
{
4
.
Note:
Take care when handling the leading
end of the cable, which is split into
thin cables. Care is also required for
the thin connector.
Figure 3-402
3-14
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-M160 FIRST EDITION