background image

4

FCC REGULATIONS (For 120 V model)

Document Scanner, Model M111091
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) This device may not cause 
harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.

Note:

 This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there 
is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the 
equipment OFF and ON, the user is encouraged to try to correct the 
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in 
Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless 
otherwise specified in the manual. If such changes or modifications 
should be made, you could be required to stop operation of the 
equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success NY 11042, U.S.A.
Tel. No. (516)328-5000

RADIO INTERFERENCE REGULATIONS (For 120 V 
models)

This digital apparatus does not exceed the Class B limits for radio 
noise emissions from digital apparatus as set out in the interference-
causing equipment standard entitled “Digital Apparatus”, ICES-003 of 
the Industry Canada.

RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE 
(For 120 V models)

Cet appareil numérique respecte les limites de bruits radioélectriques 
applicables aux appareils numériques de Classe B prescrites dans la 
norme sur le matériel brouilleur: “Appareils Numériques”, NMB-003 
édictée par l’Industrie Canada.

International ENERGY STAR

®

 Office Equipment Program

As an ENERGY STAR

®

 Partner, CANON 

ELECTRONICS INC. has determined that this 
machine meets the ENERGY STAR

®

 Program 

guidelines for energy efficiency.
The International ENERGY STAR

®

 Office Equipment 

Program is an international program that promotes 

energy saving through the use of computers and other office 
equipment. The program backs the development and dissemination of 
products with functions that effectively reduce energy consumption. It 
is an open system in which business proprietors can participate 
voluntarily. The targeted products are office equipment, such as 
computers, monitors, printers, fax, machine, copiers, and scanners. 
The standards and logos are uniform among participating nations.
This model doesn’t provide setting options for power management.

European Union (and EEA) only.

This symbol indicates that this product is not to be disposed 
of with your household waste, according to the WEEE 
Directive (2002/96/EC) and your national law. This product 
should be handed over to a designated collection point, 
e.g., on an authorized one-for-one basis when you buy a 

new similar product or to an authorized collection site for recycling 
waste electrical and electronic equipment (EEE). Improper handling of 
this type of waste could have a possible negative impact on the 
environment and human health due to potentially hazardous 
substances that are generally associated with EEE. At the same time, 
your cooperation in the correct disposal of this product will contribute 
to the effective usage of natural resources. For more information 
about where you can drop off your waste equipment for recycling, 
please contact your local city office, waste authority, approved WEEE 
scheme or your household waste disposal service. For more 
information regarding return and recycling of WEEE products, please 
visit www.canon-europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)

0-00-DR-M160_RG_UK.book  Page 4  Thursday, June 9, 2011  8:04 PM

Summary of Contents for imageFORMULA DR-M160

























































Reviews: