manualshive.com logo in svg

Canon imageCLASS MF416dw, User Manual

Share
Download
Canon imageCLASS MF416dw User Manual Download Page 185

●

Registered settings are saved even when the machine is turned OFF.

●

To edit or delete registered settings, go to <Fax>   <Favorite Settings>   <Edit/Delete>   <Edit> or <Delete>
and then follow the steps below.
To edit a setting:

Select the setting to be edited   change the setting   tap <Apply>   <Yes>.
To delete a setting:

Select the setting to be deleted   tap <Yes>.

●

Destinations cannot be changed once the settings have been registered. To change a destination, delete the
settings and then register them again.

●

If you registered a destination that was specified from the Address Book and then delete the destination
entry in the Address Book, the destination is also deleted from the favorite fax settings.

Recalling Favorite Settings

Simply select the setting combination that suits your purpose from the favorite settings.

<Fax>   <Favorite Settings>   Select the setting combination to be recalled

●

Once you have recalled the setting combination, you can also change the fax settings as needed.

LINKS

Sending Faxes (MF419x / MF416dw)(P. 149)

Faxing

176

Summary of Contents for imageCLASS MF416dw






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands