Canon imageClass LBP6030 Manual Download Page 107

Page: 107 / 272

Enter hexadecimal numbers delimited by ":" (colons) (Example: "fe80::10").

To specify a range of addresses

Insert a hyphen ("-") between the addresses (Examples: "192.168.0.10-192.168.0.20" "fe80::10-fe80::20").

To specify a range of addresses with a prefix

Enter an address, followed by a slash ("/") and a number indicating the prefix length (Examples: "192.168.0.32/27"
"fe80::1234/64").

When [Reject] is selected for an outbound filter

Outgoing multicast and broadcast packets cannot be filtered.

To delete an IP address that has been set

Select the IP address to delete, and then click [Delete].

Click [OK].

Restart the machine.

Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.

㻝㻜㻣㻌㻛㻌㻞㻝㻥

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for imageClass LBP6030

















































































































































































































































































Search results

Summary of Contents for imageClass LBP6030

Reviews:

Canon imageClass LBP6030, Manual, Page: 107 / 272

Search results

Summary of Contents for imageClass LBP6030

Reviews: