Canon imageCLASS LBP325dn, Service Manual

Page: 67 / 252

● Remote UI Display Settings
To display (hide) the menu for upgrading the version of firmware using Updater on the following Remote UI screen: [Settings/
Registration] > [Management Settings] > [License/Others] > [Register/Update Software] (hereinafter referred to as [Register/
Update Software] screen).
Display of [Delivered Installation] in [Install Applications/Options] in [Settings/Registration] menu
Set to display [Delivered Installation] in [Install Applications/Options] menu on [Register/Update Software] screen.
Specify this setting to allow users to install MEAP applications using the Updater function.
This operation is not necessary if you do not want to allow users to do so.
1. Enter service mode.
2. Set "On" for the following service mode:
• SERVICE MODE > FUNCTION GR. > MEAP > CDS-MEAP
When this setting is enabled, [Delivered Installation] is displayed on [Register/Update Software] screen in [Settings/
Registration] menu.
Displaying [Update Firmware] Menu on the [ Register/ Update Software] Screen
Set to display the [Update Firmware] menu on the [Register/Update Software] menu of the Remote UI.
Specify this setting to allow users to upgrade the firmware using the Updater function.
This operation is not necessary if you do not want to allow users to do so.
1. Enter service mode.
2. Set "On" for the following service mode:
• SERVICE MODE > FUNCTION GR. > MEAP > CDS-FIRM
When this setting is enabled, the [Update Firmware] menu is displayed on the [Register/Update Software] screen of the
[Settings/Registration] menu.
Display of [Scheduled Update] on [Settings/Registration] menu
Set to display [Scheduled Update Settings] menu on [Register/Update Software] screen of Remote UI.
3. Technical Explanation (System)
57