Canon imageCLASS LBP325dn Service Manual Download Page 183

Page: 183 / 252

2. Free the Link Arm from the boss of the Fixing Assembly, and remove the Fixing Assembly.

CAUTION:

Points to Note when Installing the Link Arm
Be sure to check that the Link Arm is installed properly, otherwise the Cartridge Cover cannot be closed.

Removing the Main Motor

■ Preparation

“Removing the Rear Cover Unit” on page 127

2. Remove the cassette.

“Removing the Cartridge” on page 127

“Removing the Right Cover Unit” on page 129

“Removing the Left Cover” on page 133

5. Parts Replacement and Cleaning

173

Summary of Contents for imageCLASS LBP325dn




























































































































































































































































Search results

Summary of Contents for imageCLASS LBP325dn

Reviews:

Related manuals for imageCLASS LBP325dn

Brands by name

Popular brands

Canon imageCLASS LBP325dn, Service Manual

Search results

Summary of Contents for imageCLASS LBP325dn

Reviews:

Related manuals for imageCLASS LBP325dn

Brands by name

Popular brands