Canon ImageCLASS 2300, Reference Manual

Page: 27 / 197

Installation, Location, and Handling 1-4
Bef
ore
Y
ou Star
t Using
This Machine
1
■
Avoid exposing the machine to rapid changes in temperature.
If the room in which the machine is installed is cold but rapidly heated, water droplets
(condensation) may form inside the machine. This may result in a noticeable
degradation in the quality of the copied image, the inability to properly scan an original,
or the copies having no printed image at all.
■
Avoid installing the machine near computers or other precision electronic
equipment.
Electrical interference and vibrations generated by the machine during printing can
adversely affect the operation of such equipment.
■
Avoid installing the machine near televisions, radios, or similar electronic
equipment.
The machine might interfere with sound and picture signal reception. Insert the power
plug into a dedicated power outlet and maintain as much space as possible between
the machine and other electronic equipment.
■
About the machine's leveling feet.
Do not remove the machine's leveling feet after the machine has been installed. If you
put weight on the front of the machine while the drawers or units within the machine are
pulled out, the machine may fall forward. To prevent this from happening, make sure
that the machine's leveling feet are in place.