Canon image RUNNER 3245, Getting Started Manual, Page: 71 / 180

Protocol Settings 5-11
5
Using a TCP/IP Network
3
On the IPv6 Settings screen, press [Stateless Address Settings]
→
specify the
following.
[On] for <Use Stateless Address>: A stateless address is automatically set when the machine is started.
The stateless address is discarded when the machine is restarted (with the machine's main power switch
ON).
4
On the IPv6 Settings screen, press [Manual Address Settings]
→
specify the
following.
[On] for <Use Manual Address>: You can set the IPv6 address manually.
Enter the IPv6 address value in [Manual Address] and the IPv6 address prefix length in [Prefix Length].
Enter the default router address value in [Default Router Addr.]. If you do not want to specify the default
router address, leave [Default Router Addr.] blank.
You cannot use a manual address if you leave [Manual Address] blank. You also cannot set any of the
following types of address for [Manual Address]:
Multicast address
Address composed entirely of zeros
IPv4 compatible address (an IPv6 address with the top 96 bits set to '0' and an IPv4 address in the lower
32 bits)
IPv4 mapped address (an IPv6 address with the top 96 bits set to '0:0:0:0:0:ffff:' and an IPv4 address in the
lower 32 bits)
You cannot enter a multicast address or an address composed entirely of zeros in [Default Router Addr.].
•
-
-
-
-
•