Canon image RUNNER 3245, Getting Started Manual, Page: 68 / 180

Protocol Settings 5-8
5
Using a TCP/IP Network
If you want to restrict the IPv4 addresses of computers from which data (print/fax/I-
fax job) can be sent to the machine:
<Apply Settings> of [Permit IPv4 Address] for <RX/Print Range>: [On]
Press [Register]
→
store only one IPv4 address or a range of IPv4 addresses that are to be permitted.
<Apply Settings> of [ Reject IPv4 Address ] for <RX/Print Range>: [On]
Press [Register]
→
store only one IPv4 address or a range of IPv4 addresses that are to be rejected.
If you do not want to restrict the IPv4 addresses of computers on which the machine
setting items can be set or browsed (using the Remote UI or utility):
<Apply Settings> of [Permit IPv4 Address] for < Setting/Browsing Range >: [Off ]
<Apply Settings> of [Reject IPv4 Address] for <Setting/Browsing Range>: [Off ]
If you want to restrict the IPv4 addresses of computers on which the machine set-
ting items can be set or browsed (using the Remote UI or utility):
<Apply Settings> of [Permit IPv4 Address] for <Setting/Browsing Range>: [On]
Press [Register]
→
store only one IPv4 address or a range of IPv4 addresses that are to be permitted.
<Apply Settings> of [Reject IPv4 Address] for <Setting/Browsing Range>: [On]
Press [Register]
→
store only one IPv4 address or a range of IPv4 addresses that are to be rejected.
●
☐
☐
●
☐
☐
●
☐
☐