7
Holding it at the positions indicated, close the Roll
Cover.
8
Pull the Release Lever forward.
Roll paper cannot be inserted into the paper feed slot
Roll paper cannot be inserted into the paper feed slot
Cause
Corrective Action
The roll paper is warped.
Straighten out curls and reload the roll.
Paper is jammed by the paper feed slot.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
➔
P.83
(See "Clearing a Jammed Sheet.")
➔
P.86
The paper source selection is incorrect.
Press the
Load
button and select the paper source.
Cannot load sheets
Cannot load sheets
Cause
Corrective Action
The paper source selection is incorrect.
Press the
Load
button and select the paper source.
Paper is not cut neatly
Paper is not cut neatly
Cause
Corrective Action
The paper is bent or curled at the cut posi-
tion.
Straighten out any curling by the edges of the paper.
Paper rises by the ends of the cut position
before it is cut.
Reload the paper correctly.
You are using paper that cannot be cut with
the Cutter Unit.
Specify
Manual
in
Cutting Mode
in the Control Panel menu and use scissors or a
cutting tool to cut the roll after printing.
(See "Specifying the Cutting Method for Rolls.")
➔
User's Guide
iPF680 Series
Roll paper cannot be inserted into the paper feed slot
Basic Guide
Troubleshooting
Problems Regarding Paper
91
