manualshive.com logo in svg

Canon image Prograf iPF680 Series, Basic Manual

Share
Download
Canon image Prograf iPF680 Series Basic Manual Download Page 120

Messages regarding ink

Messages regarding ink

Ink insufficient. ...............................................................................................................................................................

120

No ink left. ........................................................................................................................................................................

120

Remaining level of the ink cannot be correctly detected. Check ink tank. .........................................

120

Cannot detect ink level correctly. Close tank cover. .....................................................................................

120

Close Ink Tank Cover ..................................................................................................................................................

121

Ink tank is empty. ..........................................................................................................................................................

121

Not much ink is left. .....................................................................................................................................................

121

Check if ink tank is set, and its color and direction. .....................................................................................

121

The following ink tanks cannot be recognized. ...............................................................................................

121

Wrong ink tank. .............................................................................................................................................................

121

Do not pull out ink tank. ............................................................................................................................................

121

Ink insufficient.

Ink insufficient.

Cause

Corrective Action

The ink level is low, so you cannot print, clean the Printhead, or
do other operations that require ink.
There is not enough ink of the color with 

×

 displayed above the

remaining ink indicator.

Press 

▲

 or 

▼

 to select 

Rep. Ink Tank

, and then press the 

OK

button. Replace the Ink Tank that is low with a new Ink Tank.
 (See "Replacing Ink Tanks.")

➔

P.25

Press 

▲

 or 

▼

 to select 

Continue to print

, and then press the

OK

 button to resume printing. However, note that this error

may affect the printing quality.

Press the 

OK

 button, open the Ink Tank Cover, and replace the

Ink Tank for the color that does not have enough ink.
 (See "Replacing Ink Tanks.")

➔

P.25

No ink left.

No ink left.

Cause

Corrective Action

There is no ink left.
There are no ink colors with 

×

 displayed above

the remaining ink indicator.

Press the 

OK

 button, open the Ink Tank Cover, and replace the Ink Tank for

the color that is out of ink.
 (See "Replacing Ink Tanks.")

➔

P.25

Remaining level of the ink cannot be correctly detected. Check ink tank.

Remaining level of the ink cannot be correctly detected. Check ink tank.

Cause

Corrective Action

Ink level detection cannot work correctly
if you use refill ink tanks.

The refill ink tank can no longer be used. See the section 

Ink level detection

 and take

the appropriate action.  (See "Ink Level Detection.")

➔

P.108

Cannot detect ink level correctly. Close tank cover.

Cannot detect ink level correctly. Close tank cover.

Cause

Corrective Action

The remaining ink level could not be correctly detected.

Close the Ink Tank Cover.
The buzzer stops sounding.
Next, "

No ink left.

" is displayed and see "No ink left.."

➔

P.120

Ink insufficient.

                                                                                                                                                                                     

iPF680 Series

                                                                                                                                                                                                                      

Basic Guide

   

Error Message

Messages regarding ink

 

120

Summary of Contents for image Prograf iPF680 Series





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands