Canon IB4000 series Online Manual Download Page 261

Page: 261 / 629

Edit Accessible IP Address Screen/Add Accessible IP Address
Screen

Note

• This screen is not available depending on the printer you are using.

The example screenshots in this section refer to the

Add Accessible IP Address

Screen.

Specification Method:

Select either

Single Address Specification

Range Specification

to add the IP address(es).

Single Address Specification

Specify each IP address separately.

Range Specification

Specify a range of successive IP addresses.

IP Address:

Enter the IP address of a computer or a network device to allow access when you selected

Single

Address Specification

Specification Method:

An IP address is expressed as four values ranging from 0 to 255.

Start IP Address:

Enter the first IP address in the range of addresses of the computers or network devices to allow
access when you selected

Range Specification

Specification Method:

An IP address is expressed as four values ranging from 0 to 255.

End IP Address:

Enter the last IP address in the range of addresses of the computers or network devices to allow
access when you selected

Range Specification

Specification Method:

An IP address is expressed as four values ranging from 0 to 255.

Note

• The

Start IP Address:

must be a smaller value than the

End IP Address:

Comment:

Optionally enter any information to identify the device, such as the name of the computer.

Important

• Comments will be displayed only on the computer used to enter them.

261

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for IB4000 series






















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IB4000 series

Reviews:

Brands by name

Popular brands

Canon IB4000 series, Online Manual

Search results

Summary of Contents for IB4000 series

Reviews:

Brands by name

Popular brands