(1) Set the Ethernet driver.
If you want the communication method and Ethernet type to be set automatically, select the [Auto Detect] check box.
If you want to fix the settings for communication method and Ethernet type, clear the [Auto Detect] check box, and
set the following.
Using [Communication Mode], select the Ethernet communication method that matches the network
environment you are using.
[Half Duplex]
Sending and receiving are not performed simultaneously. They are performed
alternately.
[Full Duplex]
Sending and receiving are performed simultaneously.
If you select half duplex when fixing the Ethernet type, sending and receiving are not performed
simultaneously. They are performed alternately. If you select full duplex, sending and receiving are performed
simultaneously.
If you are using a hub, match the settings for the hub and the printer. For the settings of the hub you are
using, consult your network administrator.
(Example)
Hub settings
Communication mode: Full duplex
Ethernet type: 10 Base-T
Printer settings
[Auto Detect]: [Off]
[Communication Mode]: [Full Duplex]
[Ethernet Type]: [10 Base-T]
Using [Ethernet Type], Select the Ethernet type that matches the network environment you are using.
(2) Click [OK].
㻟㻡㻢㻌㻛㻌㻥㻢㻟
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
manuals search engine