Canon G500 Series Online Manual Download Page 311

Page: 311 / 361

5. Check message and select

•

From computer (macOS):

•

Adjust the setting to prevent paper abrasion from Remote UI.

Opening Remote UI for Maintenance

Check5

If brightness is set low, increase brightness setting and try printing again.

(Windows)

If you are printing with a low brightness setting on plain paper, the paper may absorb too much ink and become
wavy, causing paper abrasion.

Check the brightness setting in the printer driver.

Adjusting Brightness

Check6

Is paper feed roller dirty?

Clean paper feed roller.

Cleaning Paper Feed Rollers

Check7

Is inside of printer dirty?

During duplex printing, ink may stain the inside of the printer, smudging the printout.

Perform bottom plate cleaning to clean inside of printer.

Cleaning Inside the Printer (Bottom Plate Cleaning)

Note

• To prevent staining inside the printer, be sure to set the correct paper size.

•

Check8

Set longer ink drying time.

This allows the printed surface to dry, preventing smudges and scratches.

•

For Windows:

•

1. Check that printer is turned on.

2. Open Canon IJ Printer Assistant Tool.

Opening the Maintenance Tool (Canon IJ Printer Assistant Tool)

3. Select

Custom Settings

4. Drag

Ink Drying Wait Time

slide bar to set the wait time and select

5. Check message and select

•

For macOS:

•

Set the waiting time using Remote UI.

311

Summary of Contents for G500 Series










































































































































































































































































































































































Search results

Summary of Contents for G500 Series

Reviews:

Related manuals for G500 Series

Brands by name

Popular brands

Canon G500 Series, Online Manual

Search results

Summary of Contents for G500 Series

Reviews:

Related manuals for G500 Series

Brands by name

Popular brands