Canon G2010 Series Online Manual Download Page 268

Page: 268 / 296

Message (Support Code) Appears

This section describes some of the errors and messages that may appear.

Note

• A support code (error number) is displayed on the computer for some errors. For details on errors that

have support code, see

Error Regarding Power Cord Being Unplugged Is Displayed
Writing Error/Output Error/Communication Error
Other Error Messages
Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is Displayed

Error Regarding Power Cord Being Unplugged Is Displayed

The printer may have been unplugged while it was on.

Check the error message that appears on the computer and click

The printer starts printing.

See

Unplugging the Printer

for unplugging the power cord.

Writing Error/Output Error/Communication Error

Check1

If the

lamp is off, make sure printer is plugged in and turn it on.

The

lamp flashes while the printer is initializing. Wait until the

lamp stops flashing and remains lit.

Check2

Make sure USB cable is securely plugged in to printer and computer.

When the USB cable is securely plugged in, check the following:

• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the

computer, and retry the printing. If printing starts normally, there is a problem with the relay device.
Contact the vendor of the relay device.

• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.

Check3

Make sure MP Drivers are installed correctly.

Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and
reinstall them from the Setup CD-ROM or the Canon website.

268

Summary of Contents for G2010 Series









































































































































































































































































































Search results

Summary of Contents for G2010 Series

Reviews:

Related manuals for G2010 Series

Brands by name

Popular brands

Canon G2010 Series, Online Manual

Search results

Summary of Contents for G2010 Series

Reviews:

Related manuals for G2010 Series

Brands by name

Popular brands