Canon G2010 Series Online Manual Download Page 269

Page: 269 / 296

Check4

When printer is connected to your computer with a USB cable, check device

status from your computer.

Follow the procedure below to check the device status.

1. Open the Device Manager on your computer as shown below.

User Account Control

screen is displayed, follow the on-screen instructions.

• In Windows 10, right-click

Start

button and select

Device Manager

• In Windows 8.1, select

Control Panel

from

Settings

charm on

Desktop

Hardware and Sound

Device Manager

• In Windows 7, click

Control Panel

Hardware and Sound

, and

Device Manager

2. Double-click

Universal Serial Bus controllers

and

USB Printing Support

USB Printing Support Properties

screen does not appear, make sure the printer is correctly

connected to the computer.

Check2

Make sure USB cable is securely plugged in to printer and computer.

3. Click

General

tab and check for a device problem.

If a device error is shown, see Windows Help to resolve it.

Other Error Messages

Check

If an error message appears outside printer status monitor, check the

following:

• "

Could not spool successfully due to insufficient disk space

Delete any unnecessary files to increase the amount of free space on the disk.

• "

Could not spool successfully due to insufficient memory

Close other applications to increase the available memory.

If you still cannot print, restart your computer and retry the printing.

• "

Printer driver could not be found

Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and
reinstall them from the Setup CD-ROM or the Canon website.

• "

Could not print Application name

- File name"

Try printing again once the current job is complete.

Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is

Displayed

269

Summary of Contents for G2010 Series









































































































































































































































































































Search results

Summary of Contents for G2010 Series

Reviews:

Related manuals for G2010 Series

Brands by name

Popular brands

Canon G2010 Series, Online Manual

Search results

Summary of Contents for G2010 Series

Reviews:

Related manuals for G2010 Series

Brands by name

Popular brands