Canon G2000 series, Service Manual

Page: 40 / 80

(40/80)
QY8-13EX-040
3. ADJUSTMENT / SETTINGS
3-1. Adjustment
Adjustment Purpose Method
Approx.
time
Destination settings
(EEPROM settings)
To set the printer destination.
- At Main PCB Ass’y replacement
Service Tool
*1
Set Destination section
1 min.
Ink absorber counter
resetting
(EEPROM settings)
To reset the ink absorber counter.
- At Main Absorber Kit (whole)
replacement
Service Tool
*1
Main in the Clear Ink Counter
section
1 min.
Ink absorber counter
value setting
(EEPROM settings)
To set the data of the actual ink amount
absorbed in the ink absorber to the
EEPROM.
- At Main PCB Ass’y replacement
- At Main Absorber Kit (partial)
replacement
Service Tool
*1
Main in the Ink Absorber Counter
section
1 min.
Automatic print head
alignment
*2
To secure the dot placement accuracy.
- At cartridge replacement
- At Main PCB Ass’y replacement
- When print quality is not satisfying
Perform Automatic Print Head
Alignment in the user mode from the
printer operation panel, or via the
printer driver Maintenance tab.
3 min.
Manual print head
alignment
To secure the dot placement accuracy.
- At cartridge replacement
- At Main PCB Ass’y replacement
- When print quality is not satisfying
even after Automatic Print Head
Alignment is performed
Perform Manual Print Head
Alignment in the user mode via the
printer driver Maintenance tab.
8 min.
Grease application To maintain sliding properties of the
applicable portions.
- At Carriage Unit replacement
- At Cap Blade Unit replacement
Using a brush, etc., apply G-1054-2
or FLOIL KG-51K3. See 3-4, Grease
Application , for details.
1 min.
*
1
: Install the Service Tool to a licensed PC.
*
2
: For the G2000 series and the G3000 series only.
easyfixs.blogspot.com