(79/80)
QY8-13EX-040
6. PRINTER TRANSPORTATION
Special notes on transportation of the printer:
To prevent ink leakage during transportation, be sure to follow the instructions below.
1) Never remove the cartridges (print head). Transport the printer with the print head installed.
2) Lock the carriage at the home position (far right of the printer).
(If you cannot lock the carriage due to an error or failure, manually move the carriage to the far
right).
3) Secure the carriage with the tape.
4) Pack the printer in a plastic bag so that the surroundings may not get dirty with ink.
5) The printer must be kept with its bottom facing down in a box. Use a solid box and fill the box with
packing material to protect the printer from moving in the box.
6) Keep the box so that the printer stays with its bottom facing down. DO NOT turn the box.
7) Be sure to tell the carrier that the box contains a precision equipment and it must be handled with
the right side up with care.
Before transporting the printer:
1) Turn on the printer with the cartridge (print head) left installed in the printer.
When you cannot turn on the printer, unplug the power cord and go to 3).
When an error occurs, release the error using the
Black
button or the
Color
button.
(For the G1000 series, press the
Stop
button to release the error).
If you cannot release the error, push the
ON
button to turn off the printer, unplug the power
cord and go to 3). If you cannot turn off the printer, unplug the power cord and go to 3).
2) Place the printer into the transportation mode.
Press and hold the Stop button, release it after the Alarm lamp flashes seven times, and the
printer will be placed into the transportation mode.
(For the G1000 series, press and hold the Stop button, release it after the Alarm lamp flashes
eight times, and the printer will be placed into the transportation mode.).
3) Confirm that the carriage has already moved to the far right.
If you cannot turn on the printer or the carriage cannot move due to the error, move the
carriage to the far right manually.
4) Secure the carriage with the tape.
5) Confirm that the ink cap is closed.
6) Pack the printer in a plastic bag.
7) Attach the protective material to the printer when packing the printer in the box.
easyfixs.blogspot.com
Summary of Contents for G2000 series
