background image

35

 Chapter 1: Getting the Lay of the Land

happens after 30 seconds, but you can change the shutdown delay to 
1, 2, 4, 8, or 15 minutes. Or you can disable auto shutdown altogether 
by selecting the Off setting, although even at that setting, the monitor 
still turns itself off if you ignore the camera for 30 minutes. Just give the 
shutter button a quick half-press and release, or press the Disp button 
to bring the monitor out of hibernation.

 ✓ 

Auto Rotate:

 If you enable this feature, your picture files include a piece 

of data that indicates whether the camera was oriented in the vertical 
or horizontal position when you shot the frame. Then, when you view 
the picture on the camera monitor or on your computer, the image is 
automatically rotated to the correct orientation. Chapter 5 details this 
playback option, which is enabled by default.

 ✓ 

Format:

 The first time you insert a new memory card, use this option to 

format

 the card, a maintenance function that wipes out any existing data 

on the card and prepares it for use by the camera.

 

 If you previously used your card in another device, such as a digital 

music player, be sure to copy those files to your computer before you 
format the card. You lose 

all

 data on the card when you format it, not 

just picture files.

 

 When you choose the Format option from the menu, you can opt to 

perform a normal card formatting process or a 

low-level 

formatting. The 

latter gives your memory card a deeper level of cleansing than ordinary 
formatting and thus takes longer to perform. Normally, a regular format-
ting will do although performing a low-level formatting can be helpful if 
your card seems to be running more slowly than usual. However — and 
this is a however for anyone with a high-security clearance who’s shoot-
ing pictures that should 

never

 fall into enemy hands — a regular-level 

formatting leaves enough bits of data intact that a determined computer 
wiz could recover your images. To prevent that possibility, do a low-
level formatting or crush the card under your heel. Or run over it with 
your car. You can never be too safe, with all these spies running around 
looking just like your mild-mannered neighbor.

 ✓ 

File Numbering:

 This option controls how the camera names your pic-

ture files.

 

 

Continuous:

 This is the default; the camera numbers your files 

sequentially, from 0001 to 9999, and places all images in the same 
folder. The initial folder name is 100Canon; when you reach image 
9999, the camera creates a new folder, named 101Canon, for your 
next 9,999 photos. This numbering sequence is retained even if you 
change memory cards, which helps to ensure that you don’t wind 
up with multiple images that have the same filename.

 

 

Auto Reset:

 If you switch to this option, the camera restarts file 

numbering at 0001 each time you put in a different memory card or 
create a new folder, an option discussed next. Enabling this option 
isn’t a good idea, for the reason we stated already.

05_9781118094976-ch01.indd   35

05_9781118094976-ch01.indd   35

7/7/11   5:28 PM

7/7/11   5:28 PM

Summary of Contents for EOS REBEL T3/1100D



































Reviews: