Canon EOS M200 Advanced User'S Manual Download

Page: 91 / 522

Night Portrait Mode

When you want to photograph people at night and obtain a natural-looking

night scene in the background, use the

[

]

(Night Portrait) mode. Note

that

a flash is required for shooting.

Using a tripod is recommended.

Shooting Tips

Use a wide-angle lens and a tripod.

When using a zoom lens, use the wide-angle end to obtain a wide night

view. Also, since camera shake is prone to occur with handheld shooting,

use a tripod.

Check the image brightness.

It is recommended to play back the captured image on location to check

the image brightness. If the subject looks dark, move nearer and shoot

again.

Also shoot in other shooting modes.

Since camera shake is prone to occur with night shots, shooting also with

[

]

is recommended.

If you use the self-timer together with a flash, the self-timer lamp will light up
briefly after the picture is taken.

Summary of Contents for EOS M200











































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands

Canon EOS M200, Advanced User'S Manual

Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands