Canon EOS M200 Advanced User'S Manual Download

Page: 201 / 522

201

Movie Mode

(2)

(1)

Record the movie.

Press the movie shooting button to start

recording a movie.

While the movie is being recorded, the

[

REC]

mark (1) will be displayed on

the upper right of the screen.

Sound is recorded by the microphones

at the positions indicated (2).

To stop recording the movie, press the

movie shooting button again.

You can lock the exposure (AE lock) by pressing the <

> button. To cancel,

press the <

> button again. (Retained until the <

> button is pressed again.)

Exposure compensation can be set in a range of up to ±3 stops.

ISO speed, shutter speed, and aperture value are not recorded in movie Exif
information.

ISO Speed in [

] Mode

ISO speed is set automatically. For details on the ISO speed, see

501.

Summary of Contents for EOS M200











































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands

Canon EOS M200, Advanced User'S Manual

Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands