manualshive.com logo in svg

Canon EOS M10, User Manual

Share
Download
Canon EOS M10 User Manual Download Page 49

49

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode /  

Hybrid Auto Mode

Other Shooting Modes

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

P Mode

Saving/Loading Settings

Save your favorite settings and use them again as needed.

Saving Settings

 

●

Follow steps 1 – 2 in “Shooting with 

Your Favorite Settings (Creative Assist)” 

(

=

 49) to choose [

] and configure 

the settings as desired.

 

●

Press the [ ] button, press the [ ][ ] 

buttons to choose [ ], and then choose 

a profile to save the settings to, either by 

pressing the [ ][ ] buttons or turning the 

[

] dial.

 

●

You can save setting in up to six profiles.

 

●

[

 Compare] is displayed if you have 

already assigned the selected profile. 

With this profile selected, you can press 

the [

] button to view the previous 

settings and compare them to your new 

settings.

 

●

Press the [ ] button, press the 

[ ][ ] buttons to choose [OK] after the 

confirmation message, and then press 

the [ ] button.

1 

Enter [ ] mode.

 

●

Follow step 1 in “Shooting in Hybrid Auto 

Mode” (

=

 37) and choose [ ].

2 

Configure the settings.

 

●

Press the [ ] button, press the 

[ ][ ] buttons to choose an item, and 

then adjust the setting, either by pressing 

the [ ][ ] buttons or turning the [

] 

dial (

=

 31).

 

●

Once you are finished adjusting each 

item, press the [

] button to return 

to the shooting screen.

3 

Shoot.

 

●

[Background] is not available when the flash is used.

 

●

To prevent your settings from being reset when the camera is 
turned off, set [Keep 

 setting] on the [

4] tab to [Enable].

 

●

You can also access the setting screen by touching [ ] in the 
upper right, and you can touch items on the setting screen to 
adjust them. Touch [ ] to return to the shooting screen.

Summary of Contents for EOS M10





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands