Canon EOS 600D Instruction Manual Download Page 88

Page: 88 / 328

You can shoot up to about 3.7 shots per sec. This is effective for
shooting a child running toward you or capturing different facial
expressions.

Press the <

> button.

Select <

Press the <

> key or turn the

> dial to select continuous

shooting <

>, then press <

Take the picture.

The camera shoots continuously
while you hold down the shutter
button completely.

Also set the AF mode

(p.83)

matching the subject.

• For a moving subject

When AI Servo AF is set, focusing will be continuous during
continuous shooting.

• For still subjects

When One-Shot AF is set, the camera will focus only once during
continuous shooting.

Flash can also be used.

Since the flash will require recycling time, the continuous shooting
speed will be slower.

Continuous Shooting

Shooting Tips

Under [

Custom Functions (C.Fn)

], if [

5: High ISO speed noise

reduction

] (p.254) is set to [

2: Strong

], the maximum continuous

shooting burst will greatly decrease.

In AI Servo AF mode, the continuous shooting speed may become
slightly slower depending on the subject and the lens used.

The continuous shooting speed might also decrease indoors and under
low light.

Summary of Contents for EOS 600D









































































































































































































































































































































Search results

Summary of Contents for EOS 600D

Reviews:

Related manuals for EOS 600D

Brands by name

Popular brands

Canon EOS 600D, Instruction Manual

Search results

Summary of Contents for EOS 600D

Reviews:

Related manuals for EOS 600D

Brands by name

Popular brands