Canon EOS-1D Instructions Manual Download

Page: 42 / 176

White Balance Settings

Icon

Application

Color Temperature (Kelvin)

The camera sets the white balance automatically.

Approx. 3000-7000 K

For sunny daylight outdoors.

Approx. 5200 K

For shaded areas outdoors.

Approx. 7000 K

For cloudy or hazy days and during sunsets.

Approx. 6000 K

For tungsten (light bulb) light.

Approx. 3200 K

For fluorescent light.

Approx. 4000 K

When flash is used.

Approx. 5600 K

First you photograph a white object to be used as the
standard for the white balance setting. By using the white
balance data from this image, you can set the optimum
white balance. (

→

p.43)

Approx. 2000-10000 K

You can manually set white balance for 2800-10000 K (in
100 K increments). (

→

p.45)

Approx. 2800-10000 K

You can set and register up to three personal white balance
settings with the driver software (provided). (

→

p.45)

(Not displayed if no personal white balance settings have
been registered.)

–

Summary of Contents for EOS-1D

















































































































































































Search results

Summary of Contents for EOS-1D

Reviews:

Related manuals for EOS-1D

Brands by name

Popular brands

Canon EOS-1D, Instructions Manual

Search results

Summary of Contents for EOS-1D

Reviews:

Related manuals for EOS-1D

Brands by name

Popular brands