Canon EOS-1D Instructions Manual Download

Page: 53 / 176

Settings for Images

Reviewing Images

MENU

Changing the Review Time

You can change the number of seconds the image is displayed on the LCD monitor after it is
captured.

On the menu, select “Review time”.

•

Press the <

> button.

•

While pressing the <

> button, turn the <

dial to select <

•

While pressing the <

> button, turn the <

dial to select “Review time.” Then let go of the
<

> button.

Set the desired Review time.

•

While pressing the <

> button, turn the <

dial to select the desired review time. Then go of
the <

> button.

The menu will reappear.

•

To exit the menu and turn off the LCD monitor,
press the <

> button.

The “Hold” setting will set the review time to half of the auto power off time.
(

→

p.130) If auto power off is “Off,” the review time will be 15 min.

Summary of Contents for EOS-1D

















































































































































































Search results

Summary of Contents for EOS-1D

Reviews:

Related manuals for EOS-1D

Brands by name

Popular brands

Canon EOS-1D, Instructions Manual

Search results

Summary of Contents for EOS-1D

Reviews:

Related manuals for EOS-1D

Brands by name

Popular brands