manualshive.com logo in svg

Canon EOS-1D, Instructions Manual

Share
Download
Canon EOS-1D Instructions Manual Download Page 111

111

Flash Photography

6

Flash Photography with Speedlite 550EX

Modeling Flash

By firing a modeling flash, you can see the shadows and other flash lighting effects produced
by one or more Speedlites.

Make sure the camera and Speedlite are
properly set for flash photography.

1

Press the camera’s depth-of-field pre-
view button.

s

The Speedlite 550EX fires at 70 Hz for 1 second.

2

Wireless, Multi-Speedlite System

Speedlite 550EX has the following three features:

(1) E-TTL autoflash
(2) Slave unit feature
(3) Master unit feature for wireless control of 550EX slave units

By using the above features, you can set up a wireless E-TTL autoflash system with multiple
Speedlite 550EXs.
You can also set a flash output ratio for up to three Speedlites grouped as main and sub
Speedlites to create the desired flash lighting effect.

•

For details, see the 550EX and ST-E2’s Instructions booklet.

Summary of Contents for EOS-1D

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands