Canon DADF-P1, Service Manual

Page: 64 / 90

Chapter 3
3-24
2) Move to the back of the machine, remove the two screws [1], and then
detach the rear cover [2].
F-3-153
Remove the rear cover with the two claws [3] released.
3.4.11.4 Removing the ADF Driver PCB
0011-3238
1) Disconnect all connectors from the ADF driver PCB. (10 connectors)
2) Remove the two screws [1], and then remove the ADF driver PCB [2].
F-3-154
3.4.11.5 Removing the Pickup Motor
0010-6592
1) Disconnect the connector [1], and then remove the tension spring [2].
2) Remove the two screws [3], and then remove the pickup motor [4]
together with the adjusting plate.
F-3-155
3.4.11.6 Removing the Feed Motor
0010-6593
1) Disconnect the connector [1], and then remove the tension spring [2].
2) Remove the two screws [3], and then remove the feed motor [4] together
with the adjusting plate.
F-3-156
3.4.11.7 Removing the Timing Belt
0010-6594
1) Remove the screw [1], and then disconnect the ground cable [2].
F-3-157
2) Disconnect the two sensor connectors [1].
3) Remove the harness from the harness guide [2].
4) Remove the screw [3], and remove the harness guide [2].
5) Remove the two screws [4], and then remove the metal plate [5].
6) Remove the four screws [6], and then remove the left hinge [7].
[1]
[3]
[2]
[2]
[1]
[3]
[4]
[1] [3]
[2]
[1] [4]
[2]
[3]
[2] [1]