Canon DADF-P1, Service Manual

Page: 56 / 90

Chapter 3
3-16
F-3-99
4) Remove the two screws [1], two springs [2], the member [3], and the
member [4] and then remove the read roller 1 [5].
F-3-100
MEMO:
When the read roller 2 is removed first, it works easily [the installation of the
read roller 1].
3.4.8 Read Roller 2
3.4.8.1 Removing the Front Cover
0010-6608
1) Open the feeder cover [1], and then remove the screw [2].
F-3-101
2) Remove the two screws [3], and then detach the front cover [4].
F-3-102
3.4.8.2 Removing the Feeder Cover
0010-6616
1) Remove the screw [1] and positioning pin [2], and then detach the feeder
cover [3].
F-3-103
3.4.8.3 Removing the Rear Cover
0010-6623
1) Open the feeder cover.
2) Move to the back of the machine, remove the two screws [1], and then
detach the rear cover [2].
F-3-104
Remove the rear cover with the two claws [3] released.
3.4.8.4 Removing the ADF Driver PCB
0011-3235
1) Disconnect all connectors from the ADF driver PCB. (10 connectors)
2) Remove the two screws [1], and then remove the ADF driver PCB [2].
F-3-105
3.4.8.5 Removing the Pickup Motor
0010-6637
1) Disconnect the connector [1], and then remove the tension spring [2].
2) Remove the two screws [3], and then remove the pickup motor [4]
together with the adjusting plate.
[4] [3] [1]
[2]
[4]
[3]
[5]
[1]
[2] [2]
[1]
[2]
[3]
[4]
[3]
[2]
[1]
[1]
[3]
[2]
[2]
[1]