Canon DADF-P1, Service Manual

Page: 57 / 90

Chapter 3
3-17
F-3-106
3.4.8.6 Removing the Feed Motor
0010-6645
1) Disconnect the connector [1], and then remove the tension spring [2].
2) Remove the two screws [3], and then remove the feed motor [4] together
with the adjusting plate.
F-3-107
3.4.8.7 Removing the Timing Belt
0010-6652
1) Remove the screw [1], and then disconnect the ground cable [2].
F-3-108
2) Disconnect the two sensor connectors [1].
3) Remove the harness from the harness guide [2].
4) Remove the screw [3], and remove the harness guide [2].
5) Remove the two screws [4], and then remove the metal plate [5].
6) Remove the four screws [6], and then remove the left hinge [7].
F-3-109
7) Remove the four screws [1], and then remove the metal plate.
F-3-110
8) Remove the timing belt [1].
F-3-111
3.4.8.8 Removing the Document Tray
0010-6659
1) Remove the screw [1] at the front of the machine, and then remove the tray
holder [2].
2) Remove the document tray [3].
[3]
[4]
[1] [3]
[2]
[1] [4]
[2]
[3]
[2] [1]
[6]
[7]
[4]
[5]
[3]
[1]
[2]
[6]
[1]
[1]
[1]
[1]