manualshive.com logo in svg

Canon D1300 Series, Service Manual

Share
Download
Canon D1300 Series Service Manual Download Page 6

Removing the Right Cover Unit -----------------------------------------------4-15
Removing the Front Cover Unit -----------------------------------------------4-17
Removing the Rear Cover Unit ------------------------------------------------4-18
Removing the Upper Cover ----------------------------------------------------4-19

External Cover (MF5900/MF6100) ------------------------------------- 4-20

Removing the Left Cover Unit -------------------------------------------------4-20
Removing the Left Rear Cover ------------------------------------------------4-21
Removing the Right Cover -----------------------------------------------------4-22
Removing the Front Cover -----------------------------------------------------4-24
Removing the Rear Cover Unit ------------------------------------------------4-24
Removing the Upper Cover ----------------------------------------------------4-26

Document Exposure / Delivery System ------------------------------- 4-27

Removing the ADF Unit + Reader Unit --------------------------------------4-27
Removing the ADF Roller Unit -------------------------------------------------4-29
Removing the ADF Pickup Roller ---------------------------------------------4-30
Removing the ADF Separation Roller ---------------------------------------4-31
Removing the ADF Separation Pad ------------------------------------------4-33
Removing the ADF Pickup Feed Unit ----------------------------------------4-34
Removing the ADF Pickup Motor Unit ---------------------------------------4-37
Removing the ADF Delivery Solenoid Unit ---------------------------------4-38
Removing the Reader Unit Upper Cover -----------------------------------4-38
Removing the CIS Unit ----------------------------------------------------------4-40

Controller System ----------------------------------------------------------- 4-42

Removing the Controller Cover -----------------------------------------------4-42
Removing the Main Controller Board ----------------------------------------4-42
Removing the NCU PCB (FAX Model Only) -------------------------------4-44
Removing the OFF Hook PCB (FAX Model Only) ------------------------4-44
Removing the Controller Box --------------------------------------------------4-45
Removing the Engine Controller Unit  ---------------------------------------4-46
Removing the Control Panel ---------------------------------------------------4-49
Removing the Main Motor  -----------------------------------------------------4-51
Removing the Main Fan ---------------------------------------------------------4-52
Removing the Main Drive Unit  ------------------------------------------------4-53
Removing the Duplex Drive Unit ----------------------------------------------4-55
Removing the Duplex Reverse Solenoid -----------------------------------4-56
Removing the Cassette Pickup Solenoid -----------------------------------4-57

Laser Scanner System ---------------------------------------------------- 4-58

Removing the Laser Scanner Unit --------------------------------------------4-58

Image Forming System ---------------------------------------------------- 4-59

Removing the Transfer Roller --------------------------------------------------4-59
Removing the Registration Unit -----------------------------------------------4-60

Fixing System ---------------------------------------------------------------- 4-61

Removing the Fixing Assembly ------------------------------------------------4-61

Pickup / Feed System ------------------------------------------------------ 4-63

Removing the Duplex Feed Unit ----------------------------------------------4-63
Removing the Cassette Pickup Roller ---------------------------------------4-65
Removing the Cassette Separation Pad ------------------------------------4-66
Removing the MP Pickup Roller ----------------------------------------------4-66
Removing the MP Separation Pad -------------------------------------------4-67

Adjustment

Overview ------------------------------------------------------------------------5-2

Actions after Replacement Parts ------------------------------------------5-2

Document Exposure / Delivery System -------------------------------------- 5-2

After Replacing the CIS Unit ------------------------------------------------------------- 5-2
After Replacing the ADF Unit ------------------------------------------------------------ 5-2
After Replacing the Reader Unit -------------------------------------------------------- 5-3
After Replacing the Reader Upper Cover Unit -------------------------------------- 5-3

Controller System ------------------------------------------------------------------ 5-4

After Replacing the Main Controller PCB --------------------------------------------- 5-4

Trouble Shooting

Test Print ------------------------------------------------------------------------6-2

Test Pages --------------------------------------------------------------------------- 6-2

Engine-test Page --------------------------------------------------------------------------- 6-2
Controller Test Print  ----------------------------------------------------------------------- 6-2

Trouble Shooting Items ------------------------------------------------------6-3

Special Mode ----------------------------------------------------------------------- 6-3
Trailing edge image soiling ------------------------------------------------------ 6-4
Repetitive Image Defects Ruler ------------------------------------------------ 6-4
Nip-width Specifications ---------------------------------------------------------- 6-5

Version Up ----------------------------------------------------------------------6-6

Summary of Contents for D1300 Series

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands